Harbor Freight Tools 96526 Save This Manual, For technical questions, please call

Page 2

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Danger

WARNING

Caution

Notice

Caution

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

SKU 96526

For technical questions, please call 1-800-444-3353.

Page

Image 2
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual For technical questions, please callElectrical safety General Safety RulesWork area safety Personal safetyPower tool use and care Specific Safety Rules ServiceGrounded Tools Tools with Three Prong Plugs Improperly connecting the grounding wire can resultGrounding Electric shockSee 3-Prong Plug and Outlet Outlets for 2-Prong Plug Double Insulated Tools Tools with Two Prong PlugsExtension Cords See Outlets for 2-Prong PlugSKU For technical questions, please call SymbologyFeet Unpacking SpecificationsTo Charge The Battery Set-Up InstructionsTo Attach The Charged Battery To The Drill/Driver Figure aTo Insert And Remove Drill And Screw Driver Bits To Operate The Forward/Reverse SwitchOperating Instructions See Figure CTo Operate The Torque Selector See Figure DSee Figure E Drill Bit SelectionDrilling An Object Inspection, maintenance, and cleaning Troubleshooting Problem Possible Causes Possible SolutionsPlease Read the Following Carefully Part DescriptionAssembly Diagram Limited 90 DAY Warranty Record Product’s Serial Number Here