|
|
|
| Specifications | |
|
|
|
| Charger Input: 120 V~ / 60 Hz |
|
| Charger Output: 24 VDC / 400mA |
|
Electrical Requirements | Battery Type: 1300 mAh |
|
| Charge Time: 3 to 5 Hours |
|
| Power Cord Type: 22 AWG x 2C |
|
Drill Speed | Dual Speed |
|
Drill RPM: 0~400 RPM (#1 Setting) / 0~1050 RPM (#2 Setting) |
| |
|
| |
Chuck Type | 1/2” Keyless |
|
|
|
|
Settings | 20 Clutch Settings / 1 Drill Setting |
|
|
|
|
Additional Features | Reversible Rotation |
|
Accessories | Battery (Qty. 1) / Charger (Qty. 1) |
|
Double Ended Screwdriver Bits (Qty. 2) |
| |
|
| |
Drill Dimensions |
| |
Net Weight | 4.2 Pounds |
|
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Set-Up Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
| Risk of accidental starting; resulting in serious personal | |
WARNING | ||
injury. Turn the Power Switch of the tool to its “OFF” | ||
| ||
| position and unplug the tool from its electrical outlet before | |
| assembling or making any adjustments to the tool. |
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
To Charge The Battery
1.The Battery (29) does not come charged from the manufacturer. Before use, you must charge the Battery. (See Figure A, next page.)
2.Plug the AC/DC Adapter’s (24)
3.Insert the AC/DC Adapter’s (24) charge cord into the Charger Stand (23).
(See Figure A.)
SKU 96526 | For technical questions, please call | Page |