Harbor Freight Tools 96526 operating instructions Specific Safety Rules, Service

Page 5

5.Service

a.Have your power tool serviced by a qualified technician using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

1.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.Avoid unintentional starting. Prepare to begin work before turning on the tool.

3.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

4.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.

5.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

6.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

7.The battery charger gets hot during use. The charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.

Do not place the charger on a flammable surface. Do not obstruct any vents on the charger. Especially avoid placing the charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the charger.

Place the charger on a stable, solid, nonflammable surface (such as a stable metal workbench or concrete floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area. Frequently monitor the charger and battery during use.

.This product is not a toy. Keep it out of reach of children.

9.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:

Avoid operating alone.

Do not use with power switch locked on.

Properly maintain and inspect to avoid electrical shock.

SKU 96526

For technical questions, please call 1-800-444-3353.

Page

Image 5
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callFor technical questions, please call Save This ManualWork area safety General Safety RulesElectrical safety Personal safetyPower tool use and care Service Specific Safety RulesGrounding Improperly connecting the grounding wire can resultGrounded Tools Tools with Three Prong Plugs Electric shockExtension Cords Double Insulated Tools Tools with Two Prong PlugsSee 3-Prong Plug and Outlet Outlets for 2-Prong Plug See Outlets for 2-Prong PlugSKU For technical questions, please call SymbologyFeet To Charge The Battery SpecificationsUnpacking Set-Up InstructionsFigure a To Attach The Charged Battery To The Drill/DriverOperating Instructions To Operate The Forward/Reverse SwitchTo Insert And Remove Drill And Screw Driver Bits See Figure CSee Figure D To Operate The Torque SelectorSee Figure E Drill Bit SelectionDrilling An Object Inspection, maintenance, and cleaning Problem Possible Causes Possible Solutions TroubleshootingPart Description Please Read the Following CarefullyAssembly Diagram Record Product’s Serial Number Here Limited 90 DAY Warranty