Saving Pictures, Troubleshooting, PC or Mac

Saving Pictures

• To save your pictures from any of the	• Remove the USB flash drive from the
studios or spin art, insert a USB flash	base and insert it into the USB port on
drive (not included and sold separately)	your computer (not included and
into the USB port on the back of the base.	sold separately).

Problem	Cause	Solution
No image on TV	TV or VCR/DVD player is	Change the TV or VCR/DVD player’s mode to
	not set to the proper input	INPUT or VIDEO IN.

		Press the channel down button on your TV
		or VCR/DVD player to change to a channel
		below channel 2.

		Consult your TV or VCR/DVD player’s
		instruction manual.

	Batteries in the base are	Replace the batteries in the base with four,
	weak or exhausted	new “AA” (LR6) alkaline batteries.

	Base timed out	The base times out after several minutes
	(sleep mode)	of inactivity. Press any button to turn it
		back on.

	No wireless connection	Make sure you have a clear path between
	between the base and the	the wireless controller and the base. Do not
	wireless remote	place the base in a closed cabinet.

		The wireless controller is not aligned with
		the sensor on the base. Move the sensor up
		or down/make sure the wireless controller is
		in front of the sensor.

Images on TV look grainy	Batteries in the base are	Replace the batteries in the base with four,
or lose color	weak or exhausted	new “AA” (LR6) alkaline batteries.

Base is not responding	Signal from wireless	Dim the lights behind you. Or use over-head/
to actions from wireless	controller to the base may	side lighting when possible.

• Press the save button on the base.

•From your computer, locate your flash drive. Hint: The picture files are compatible on

•Double-click on the flash drive to open it. Then, locate and double click on the Splatster folder.

controller	not work properly if there is
	bright light behind you

	Interference from other	Do not use other remote controllers at the
	remote controllers	same time as you are using this toy.

	Batteries in the wireless	Replace the batteries in the wireless
	controller are weak or	controller with three "AAA" (LR03)
	exhausted	alkaline batteries.

	Wireless controller is not	Make sure the transmitting tip (brush end)
	pointing towards the base	on the wireless controller is pointed towards
		the sensor in the base.

Image is stretched or	TV aspect ratio	This product is designed for use with a 4:3
distorted on a wide	set incorrectly	aspect ratio (display setting) and you should
screen TV		see black bars on the sides of the image. For
		best picture, do not use a 16:9 aspect ratio
		(stretched) wide screen setting. For more

• This will save a bitmap (.bmp) file on your

USB flash drive.

• Open the file on your computer with any picture viewing program to view and print your pictures.

information on changing this setting, refer to

your TV owner's manual.