Polycom Version 2.0.3B manual Dst

Administrator’s Guide - SoundPoint® IP / SoundStation® IP Addendum

Attribute	Permitted	Default	Interpretation
	Values
tcpIpApp.sntp.daylightSavings.fixedDay-	0, 1	0	If set to 0, month, date,
Enable			and dayOfWeek are
			used in DST start date
			calculation.
			If set to 1, then only
			month and date are
			used.
tcpIpApp.sntp.daylightSavings.start.month	1-12	3 (March)	Month to start DST.
			Mapping: 1=Jan,
			2=Feb, ..., 12=Dec
tcpIpApp.sntp.daylightSavings.start.date	1-31	8	Day of the month to
			start DST.
			Mapping (on or after): 1
			= the first occurrence of
			a given day-of-the-week
			in a month, 8 = the sec-
			ond occurrence of a
			given day-of-the-week
			in a month, 15 = the
			third occurrence of a
			given day-of-the-week
			in a month, 22 = the
			fourth occurrence of a
			given day-of-the-week
			in a month
tcpIpApp.sntp.daylightSavings.start.time	0-23	2	Time of day to start
			DST, in 24 hour clock.
			Mapping: 2=2 am, 14=2
			pm
tcpIpApp.sntp.daylightSavings.start.dayOf-	1-7	1	Day of week to apply
Week			DST.
			Mapping: 1=Sun,
			2=Mon, ..., 7=Sat
tcpIpApp.sntp.daylightSavings.start.dayOf-	0, 1	0	If set to 1 and fixedDay-
Week.lastInMonth			Enable is set to 0, DST
			starts on the last day
			(specified by start.day-
			OfWeek) of the week in
			the month. The
			start.date is ignored.
tcpIpApp.sntp.daylightSavings.stop.month	1-12	11	Month to stop DST.

4 Copyright © 2006 Polycom, Inc.