Polycom Version 2.0.3B manual Attribute Permitted Default Interpretation Values

Page 20

Administrator’s Guide - SoundPoint® IP / SoundStation® IPAddendum

Attribute

Permitted

Default

Interpretation

Values

 

 

 

 

voIpProt.SIP.outboundProxy.transport

DNSnaptr or

DNSnapt

If set to Null or

 

TCPpre-

r

DNSnaptr:

 

ferred or

 

If voIpProt.SIP.outbound-

 

UDPOnly or

 

Proxy.address is a host-

 

TLS or

 

name and

 

TCPOnly

 

voIpProt.SIP.outbound-

 

 

 

Proxy.port is 0 or Null, do

 

 

 

NAPTR then SRV look-

 

 

 

ups to try to discover the

 

 

 

transport, ports and serv-

 

 

 

ers, as per RFC 3263. If

 

 

 

voIpProt.SIP.outbound-

 

 

 

Proxy.address is an IP

 

 

 

address, or a port is given,

 

 

 

then UDP is used.

 

 

 

If set to TCPpreferred:

 

 

 

TCP is the preferred

 

 

 

transport, UDP is used if

 

 

 

TCP fails.

 

 

 

If set to UDPOnly:

 

 

 

Only UDP will be used.

 

 

 

If set to TLS:

 

 

 

If TLS fails, transport

 

 

 

fails. Leave port field

 

 

 

empty (will default to

 

 

 

5061) or set to 5061.

 

 

 

If set to TCPOnly:

 

 

 

Only TCP will be used.

 

 

 

NOTE: TLS is not sup-

 

 

 

ported on SoundPoint IP

 

 

 

300 and 500 phones.

 

 

 

 

voice.gain.rx.analog.chassis.IP_650

 

0

Gain setting.

 

 

 

 

voice.handset.sidetone.adjust.IP_430

 

-13

Handset sidetone.

 

 

 

 

call.enableOnNotRegistered

0,1

1

If set to 1, calls will be

 

 

 

allowed when the phone

 

 

 

is not successfully regis-

 

 

 

tered.

 

 

 

If set to 0, calls will not

 

 

 

be permitted without a

 

 

 

valid registration. If a

 

 

 

user picks up handset,

 

 

 

presses the New Call soft

 

 

 

key, or presses the

 

 

 

speaker phone, speed dial

 

 

 

or the line keys to get a

 

 

 

dial tone, “Service

 

 

 

unavailable” is displayed.

 

 

 

 

8

Copyright © 2006 Polycom, Inc.

Image 20
Contents SIP 2.0 Administrator’s Guide SoundPoint/SoundStation IP SIP Polycom, Inc Handset, Headset, and Speakerphone Configurable Feature KeysAttribute Default Attribute Permitted Default Interpretation Values LCD BacklightExpanded Memory and Expanded Flash Memory Permitted Attribute Values Default InterpretationDefault RAM Disk ramdisk Permitted Values Default InterpretationMicroBrowser 6 G.722 Audio Codec Attribute ValuesAttribute Default Receive rxEq USB Diagnostics Administrator’s Guide SoundPoint IP / SoundStation IP Syslog Digit MapBilling Code Server Redundancy Supported Platforms Unsupported PlatformsDisable Message Waiting Indicator by Registration Daylight Saving Time Changes forDST Platform Key IDs Miscellaneous Configuration File Changes 9.1 sip.cfgPorted on SoundPoint IP Attribute Permitted Default Interpretation Values Phone1.cfg Device Parameter Configuration File Changes Boot server Sip.cfgIntroduction CentralLocal Dial Plan in Application Configuration FileAttribute Permitted Default Interpretation Values Permitted Attribute Values Default Interpretation Dial Plan in Per-Phone Configuration File Attribute Permitted Values Default InterpretationDial Plan in Application To Digit Map digitmap/ on Trademark Information Dialplan.x.digitmap isBilling Code Entry Billing Code Entry on SoundPoint IP Phones with SylantroTrademark Information Syslog on SoundPoint IP Phones Network Configuration Changes Name Possible Values DescriptionFlash Parameter Configuration Name Possible Values DescriptionSIP Server Fallback Enhancements on SoundPoint IP Phones SIP 2.0 Administrators Guide TerminologySIP 2.1 Server Fallback Implementation Example DeploymentReg.1.server.2.address=172.23.0.1 Behavior When the Primary Server Connection Fails Before SIP Recommended Practices for Server Fallback DeploymentsChanges From Previous Phone Behavior Releases Before SIP Protocol in Application Configuration File Boot serverRegistration in Per-Phone Configuration File References Trademark Information