Polycom Version 2.0.3B manual Receive rxEq

Page 10

Administrator’s Guide - SoundPoint® IP / SoundStation® IPAddendum

• Receive <rxEq/>

 

 

 

Attribute

Default

 

 

voice.rxEq.hs.IP_650.preFilter.enable

1

 

 

voice.rxEq.hs.IP_650.postFilter.enable

0

 

 

voice.rxEq.hd.IP_650.preFilter.enable

1

 

 

voice.rxEq.hd.IP_650.postFilter.enable

0

 

 

voice.rxEq.hf.IP_650.preFilter.enable

1

 

 

voice.rxEq.hf.IP_650.postFilter.enable

0

 

 

Important

Polycom recommends that you do not change these values.

• Transmit <txEq/>.

Attribute

Default

 

 

voice.txEq.hs.IP_650.preFilter.enable

1

 

 

voice.txEq.hs.IP_650.postFilter.enable

1

 

 

voice.txEq.hd.IP_650.preFilter.enable

1

 

 

voice.txEq.hd.IP_650.postFilter.enable

0

 

 

voice.txEq.hf.IP_650.preFilter.enable

1

 

 

voice.txEq.hf.IP_650.postFilter.enable

1

 

 

Important

Polycom recommends that you do not change these values.

8

Copyright © 2006 Polycom, Inc.

Image 10
Contents SIP 2.0 Administrator’s Guide SoundPoint/SoundStation IP SIP Polycom, Inc Attribute Default Configurable Feature KeysHandset, Headset, and Speakerphone Attribute Permitted Default Interpretation Values LCD BacklightDefault Permitted Attribute Values Default InterpretationExpanded Memory and Expanded Flash Memory RAM Disk ramdisk MicroBrowser Default InterpretationPermitted Values 6 G.722 Audio Codec Attribute ValuesAttribute Default Receive rxEq USB Diagnostics Administrator’s Guide SoundPoint IP / SoundStation IP Billing Code Digit MapSyslog Server Redundancy Supported Platforms Unsupported PlatformsDisable Message Waiting Indicator by Registration Daylight Saving Time Changes forDST Platform Key IDs Miscellaneous Configuration File Changes 9.1 sip.cfgPorted on SoundPoint IP Attribute Permitted Default Interpretation Values Phone1.cfg Device Parameter Introduction Configuration File ChangesBoot server Sip.cfg CentralAttribute Permitted Default Interpretation Values Dial Plan in Application Configuration FileLocal Permitted Attribute Values Default Interpretation Dial Plan in Per-Phone Configuration File Attribute Permitted Values Default InterpretationDial Plan in Application To Digit Map digitmap/ on Trademark Information Dialplan.x.digitmap isBilling Code Entry Billing Code Entry on SoundPoint IP Phones with SylantroTrademark Information Syslog on SoundPoint IP Phones Network Configuration Changes Name Possible Values DescriptionFlash Parameter Configuration Name Possible Values DescriptionSIP Server Fallback Enhancements on SoundPoint IP Phones SIP 2.0 Administrators Guide TerminologySIP 2.1 Server Fallback Implementation Example DeploymentReg.1.server.2.address=172.23.0.1 Behavior When the Primary Server Connection Fails Changes From Previous Phone Behavior Releases Before SIP Recommended Practices for Server Fallback DeploymentsBefore SIP Protocol in Application Configuration File Boot serverRegistration in Per-Phone Configuration File References Trademark Information