Polycom Version 2.0.3B manual Flash Parameter Configuration, Name Possible Values Description

Technical Bulletin

SoundPoint ® IP, SIP 2.1

Flash Parameter Configuration

The global device parameter has been modified to include the following:

Name	Possible Values	Description
device.syslog.serverName	dotted-decimal IP address	The syslog server IP address or host name.
	OR	The default value is NULL.
	domain name string
device.syslog.transport	None=0,	The protocol that the phone will use to write to the
	UDP=1,	syslog server.
	TCP=2	If set to “None”, transmission is turned off, but the
		server address is preserved.
device.syslog.facility	0 to 23	A description of what generated the log message.
		For more information, refer to section 4.1.1 of RFC
		3165.
		The default value is 16, which maps to “local 0”.
device.syslog.renderLevel	1 to 6	Specifies the lowest class of event that will be
		rendered to syslog. It is based on
		log.render.level and can be a lower value.
		Refer to Basic Logging <level/><change/> and
		<render/> on page 138 of the SIP 2.0
		Administrator’s Guide.
device.syslog.prependMac	Enabled, Disabled	If enabled, the phone’s MAC address is prepended
		to the log message sent to the syslog server.
Note	The parameters for this feature should be put in separate configuration files to
	simplify maintenance. Do not add them to existing configuration files (such as
	sip.cfg). Create a new configuration file for parameters that should apply to all
	phones.

Polycom recommends that you test the new configuration files on two phones before initializing all phones.

Trademark Information

Polycom®, SoundPoint®, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of their respective companies.

3