Marmitek IRRF7243 user manual Freqently Asked Questions, Press Mute button of remote control

3. press Mute button of remote control.

Note: Using Philips Pronto

When ‘house code P’ is selected on the Mini Controller all commands of the Pronto will be changed into an X-10 signal on the electric net. The house code used is the same as the house code selected in the house code screen of the Pronto. When pressing the buttons of the Mini Controller ‘house code P’ will be used.

3.3 Control with the help of your RF remote control

To dim lamps:

press the ‘on’ button with the number corresponding with the unit code of the module (1 – 16) you want to dim followed by DIM or BRIGHT.

X-10 IRRF Universal remote control selected for RF use:

1.press the mode button of your remote control reserved for Home Automation.

2.select the number of the module via the numbers key board (1 – 16).

3.press ‘volume’ +/- to dim.

Note: When on the Mini Controller ‘house code P’ is selected regardless of the house code the commands of the remote control will be changed into a X – 10 signal on the electric net. The house code used is the same as the one selected on the remote control. When pressing the buttons of the Mini Controller ‘house code P’ will be used.

4. FREQENTLY ASKED QUESTIONS

What is the reason for modules to switch on/off spontaneously?

It is possible that a Marmitek X-10 System is installed at one of your neighbours using the same HouseCode. To solve this problem try to change the HouseCode of your system, or have FD10 Phase Coupler/Filter installed at your incoming mains.

ENGLISH

IRRF7243TM 9