(2) Deleting a machine from the master list
To delete a terminal number from the master list, proceed as follows:
1. Enter the PGM2 mode from the mode selection window.
2. Select “2 SETTING” from the displayed menu. The SETTING window will appear.
3. Select “21 INLINE CONFIG” from the displayed menu. The INLINE CONFIG window will appear.
4. Touch the [CONTINUE] key.
The MASTER LIST window will appear.
5. Enter a terminal number in the “IP ADDRESS 4” line and a corresponding machine number in the “MACHINE No.” line of a machine to be deleted , and then touch the [ RECORDDELETE ] key.
6. The machine will ask you as follows: “ARE YOU SURE?”
If you are sure to delete it, select “1.YES.” If not, select “2.NO.”
7.
8.
Repeat steps 5 to 6 for all machines to be deleted.
Touch the [CONTINUE] key to complete the master list.
NOTE | • You can delete any of the terminal numbers that are in the master list. | |
• Deleting the master from the master list will inhibit all requests of the satellites from being sent. | ||
|
39