Sharp KC-860U operation manual Care and Maintenance, Unit

Page 17

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the sensor opening and filters periodically.

When cleaning the unit, be sure to first unplug the power cord, and never handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

FILTER INDICATOR LIGHT

Care Cycle

After 720 hours of use

(30days ×24hours = 720)

The Filter Indicator Light will illuminate as a reminder to perform mainte- nance of the Back Panel, Sensors, and Humidifying filter. The Indicator Light will turn on after approximately 720 hours of use.

After performing maintenance, reset the Filter Indicator. Plug the unit in, turn power ON, and press the RESET button for 3 seconds. The Filter Indicator Light will go off. Even if the Filter Indicator Light is already off, the RESET button should be pressed to reset the maintenance timer.

BACK PANEL and SENSORS

ENGLISH

Care Cycle

Whenever dust accumulates

on the unit or every 2 months

Gently remove dust from the sensor opening and the back panel, using a vacuum cleaner attachment or similar tool.

When the back panel has stubborn dirt

1

In case of oily dirt, soak the back panel in water with

kitchen detergent.

2

Avoid scrubbing the back panel when washing.

Rinse the back panel repeatedly with clean water to re-

move the solution residue.

3

Drip dry panel to remove excess water.

SENSOR FILTER CARE

Remove the sensor filter and tap it lightly over a sink or bin to dislodge dust. If it is very dirty, wash it gently with lukewarm water. Do not use any detergents or chemicals of any kind to clean the filter. Dry the filter completely before replacing in the unit. Do not operate unit without all filters properly installed.

Sensor

Back Panel

Back Panel

Sensor filter

UNIT

Care Cycle Whenever dust accumulates on the unit or every 2 months

To prevent dirt or stains on the unit, clean regularly. If stains are allowed to remain, they may become difficult to remove.

Wipe with a dry, soft cloth

For stubborn stains or dirt, use a soft cloth dampened with warm water.

Do not use volatile fluids

Benzene, paint thinner, polishing powder, may damage the surface.

Do not use detergents

Detergent ingredients may damage the unit.

E-15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Manual DE Operación AIR PurifierManuel D’UTILISATION Purificador DE Aire Please read before operating your new Air Purifier English For Customer Assistance the United States Consumer Limited Warranty for U.S. Users Consumer Limited WarrantyFor Customer Assistance Canada Limited Warranty Important Safety Instructions Place on a stable surface with sufficient air circulation Installation GuidelinesFilter Guidelines Part Names Illustrative Diagram Front BackHandle2 locations left and right Sensors Rating LabelDust Monitor Main Unit DisplayFront Monitor Install the True Hepa filter Filter InstallationRefilling the Water Tank Clean AIR Mode Clean AIR & Humidify ModePress the Clean AIR Mode Button on the display About Automatic Humidify ModeMAX operation Medium operation LOW operation Quick Clean ModePollen mode operation Sound indicator setting for water supply Water Supply Indicator LightPress the Power OFF Button With the unit OFF, press the Fan Speed Button for 3 secondsUnit Care and MaintenanceReplace the filter in unit. See E-10 Water TankWashable Deodorizing Filter Care Rinse the Humidifying Tray with lukewarm water Humidifying TrayRemove the Water Tank and Humidifying Tray Humidifying FilterRemove the Humidifying filter From the Humidifying Tray Preparingtion. the descaling soluHumidifying filter Filter Replacement GuidelinesWashable Deodorizing filter Up to 5 years after opening Symptom TroubleshootingFlashing of the Clean Air Lamp Indication Error Details RemedyHumidify Indicator Light Flashing of the Quick CleanStandby Power SpecificationsEnglish Page Atténue LES Odeurs Capte LA PoussièreRafraîchit HumidifiePour Téléphoner Composez le 1-905-568-7140 pour Pour Vous ProtégerGarantie Limitée Instructions DE Sécurité Importantes Précautions Concernant LE Fonctionnement Guide D’INSTALLATIONGuide D’UTILISATION DES Filtres Ne nettoyez l’extérieur qu’avec un chiffon douxDésignation DES Pièces Poignée 2 emplacements, gauche et droit CapteursSchéma Illustratif Avant DOS DE L’APPAREILMoniteur Avant Affichage DE L’UNITÉ PrincipaleMoniteur DE Poussière Lampe témoin du Plasmacluster bleueInstallez le filtre Hepa authentique Installation DES FiltresAprès le remplissage, serrez bien le bou Remplissage DU Réservoir D’EAUChon du réservoir Replacez le réservoir d’eau dans l’appareilPropos du mode d’humidification automatique Mode D’ÉPURATION DE L’AIRBouton de vitesse du Bouton de Mode FonctionnementFonctionnement en mode Pollen Mode D’ÉPURATION RapideFonctionnement Maximum Fonctionnement MoyenRéglage d’indicateur sonore de l’alimentation en eau Lampe D’ALIMENTATION EN EAUAnnulation Appuyezl’appareil. sur le bouton d’arrêt deAppareil Soin ET EntretienPanneau Arrière ET Capteurs Cycle d’entretien Chaque jour en cas d’humidification Réservoir D’EAULa fréquence du cycle d’entretien dépend de la dureté de l’ BAC D’HUMIDIFICATIONMois Toyez le bacRetirez le filtre d’humidification du bac d’humidification Filtre D’HUMIDIFICATIONRetirez le réservoir d’eau et le bac d’humidification Guide de remplacement des filtres Guide DE Remplacement DES FiltresSymptôme Résolution DES ProblèmesDE L’ERREUR Affichage Lumineux Origine SolutionConsommation en veille CaractéristiquesFrançais Lea antes de operar su nuevo Purificador de aire Disminuye LOS Olores Atrapa EL PolvoReduce EL Polen Y Moho RefrescaInstrucciones DE Seguridad Importantes Pautas Para EL Filtro Precauciones Relacionadas CON LA OperaciónPautas Para LA Instalación Nombre DE LAS Partes Diagrama Ilustrativo Parte FrontalParte Posterior Manija 2 ubicadas a la derecha e izquierda SensoresMonitor DE Polvo Pantalla DE LA Unidad PrincipalMonitor Frontal Asegurarlas superiores en su lugar Instalación DEL FiltroInstale el filtro Hepa Después de llenar, apriete bien la tapa del Llenado DEL Tanque DE AguaTanque Reemplace el tanque de agua en la unidadSobre el Modo Automatic Humidify Humidificador automático Modo Clean AIR Aire LimpioPresione el botón Modo Clean AIR Aire Limpio en la pantalla Operación Máxima Modo Quick Clean Limpieza RápidaOperación Media Operación BajaOperación CancelaciónUnidad Cuidado Y MantenimientoLimpie y seque con un paño suave No use fluidos volátilesCiclo de cuidado a diario cuando use el humidificador Tanque DE AguaReemplazo del filtro en la unidad. Vea S-6 Enjuague la bandeja del humidificador con agua templada Bandeja DEL HumidificadorHumidificador Retire el tanque de agua y la bandeja del humidificador Filtro DEL HumidificadorTenga cuidado de no derramar agua cuando limpie el filtro Para usar ácido cítricoFiltro del humidificador Pautas Para Reemplazar EL FiltroFiltro True Hepa Hasta 5 años después de abrirlo Hasta 2 años después de abrirloSíntoma Localización DE FallasSeñal Luminosa Detalles DE Error Solución Energía de reserva EspecificacionesEspañol Sharp Plaza, Mahwah Britannia Road East Mississauga New Jersey 07495-1163 U.S.A Ontario L4Z 1W9 CanadaOsaka, Japan

KC-860U specifications

The Sharp KC-860U is an innovative air purifier and humidifier designed to provide a healthier living environment. This multifunctional device combines advanced air cleaning technologies with humidification capabilities, making it particularly beneficial for households seeking to enhance air quality and comfort.

One of the standout features of the KC-860U is its unique Plasmacluster technology. This patented system releases positive and negative ions into the air, which work to neutralize airborne pollutants, including bacteria, viruses, mold spores, and allergens. The Plasmacluster ions essentially mimic the purification process that occurs in nature, creating a fresher atmosphere inside your home.

Another key characteristic of the KC-860U is its HEPA filter. This filter captures at least 99.97% of particles that are as small as 0.3 microns, including dust, pollen, pet dander, and smoke. The combination of HEPA filtration and Plasmacluster technology ensures that harmful substances are effectively removed from the air, providing you with peace of mind that your indoor environment is safe and clean.

The device is also equipped with an activated carbon filter that effectively absorbs odors and volatile organic compounds (VOCs). This feature is particularly useful in kitchens or areas with pets, as it helps to eliminate unwanted smells and chemicals from the air.

In terms of humidity control, the KC-860U boasts a built-in humidifier that adds moisture to dry air, improving overall air quality. This is especially important in winter months or arid climates where low humidity can lead to discomfort, dry skin, and respiratory issues. The humidifier operates quietly, allowing for seamless integration into daily life without disturbing your peace.

The KC-860U is designed for convenience and ease of use. It features a user-friendly interface with intuitive controls, allowing you to adjust settings effortlessly. Additionally, it includes a filter replacement indicator, ensuring that you are always aware of when maintenance is required.

With its sleek design, the Sharp KC-860U is not just functional but also complements modern home aesthetics. It operates efficiently and is suitable for medium to large-sized rooms, making it a versatile choice for various living spaces.

In summary, the Sharp KC-860U stands out as a robust air purification and humidification solution, combining advanced Plasmacluster ion technology, HEPA filtration, and an effective humidifier. Whether you are combating allergens or simply seeking a fresher environment, this device delivers high performance and comfort in one sleek package.
Top Page Image Contents