HP Pro x2 612 G1 manual Solid-state drive

3.Remove the five Philllips PM2.4×4.6 screws (2) that secure the tablet battery to the display panel assembly.

4.Remove the tablet battery (3).

Reverse this procedure to install the tablet battery.

Solid-state drive

Description	Spare part number
256-GB, M2, SATA-3, solid-state drive	766636-001
256-GB, M2, SATA-3, SED, OPAL2, solid-state drive	766637-001
180-GB, M2, SATA-3, solid-state drive	766634-001
180-GB, M2, SATA-3, SED, OPAL1, solid-state drive	766635-001
128-GB, M2, SATA-3, solid-state drive	766633-001
64-GB, M2, SATA-3, solid-state drive	766632-001

Before removing the solid-state drive, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 39).

5.Disconnect the tablet battery cable from the system board (see Tablet battery on page 44).

Tablet replacement procedures 45