11.Remove the back cover (4).
Reverse this procedure to install the back cover.
Fingerprint reader board
Description | Spare part number |
|
|
Fingerprint reader board (includes bracket and cable) | |
|
|
Before removing the fingerprint reader board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 39).
Remove the fingerprint reader board:
1.Remove the Philllips PM1.8×2.4 screw (1) that secures the fingerprint reader board and bracket to the back cover.
2.Slide the fingerprint reader board bracket away from the front edge of the back cover, and then remove the bracket (2).
Tablet replacement procedures 41