Before removing the fan, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 39).
5.Disconnect the tablet battery cable from the system board (see Tablet battery on page 44).
Remove the fan:
1.Disconnect the fan cable (1) from the system board.
2.Loosen the Philllips PM1.9×4.8 captive screw (2) that secures the fan to the tablet frame.
3.Remove the Philllips PM1.9×2.3 broad head screw (3) that secures the fan to the tablet frame.
4.Remove the fan (4).
Reverse this procedure to install the fan.
Card reader board
Description | Spare part number |
|
|
Card reader board (includes cable) | |
|
|
Before removing the card reader board, follow these steps:
52 Chapter 5 Removal and replacement procedures