Installing
Receiver Location
This unit is intended to be used with the stand. Consult your dealer for available options. Position for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External
Equipment
The video and audio connections between components can be made with shielded video and audio cables. For best performance, video cables should utilize
Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable you will need.
Remote Control Battery Installation
1Open the cover.
2Install the batteries and replace the cover. Note the correct polarity (+ and
n
Replace used batteries with alkaline batteries for longer life.
w
CAUTION: Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
■Batteries should always be replaced as a set. Always use new batteries when replacing the old set.
■Do not combine a used battery with a new one.
■Do not mix battery types (example: ”zinc carbon” with ”alkaline”).
■Do not attempt to charge,
■Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
■When not using the remote for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
■Do not try to recharge batteries that are not intended to be recharged: they can overheat and rupture. Follow the battery manufacturer’s directions for the batteries you are using.
6HP Pavilion Plasma TV User’s Guide