HP 5100tn manual Flash Device, Flash File, Operation Failed, Flash is, Input Device, Install Toner

Printer Messages (Continued)

Message	Explanation or Recommended Action
FLASH n	The flash DIMM can take a long time to initialize the first time that it
INITIALIZING	is used.
alternates with
DO NOT POWER OFF
FLASH DEVICE	The flash DIMM had a critical failure and no longer can be used.
FAILURE	Remove the flash DIMM and replace it with a new one.
FLASH FILE	The requested operation could not be performed. You might have
OPERATION FAILED	attempted an illegal operation, such as trying to download a file to a
	non-existent directory.
FLASH FILE	Delete files from the flash DIMM or add another one. Download or
SYSTEM IS FULL	delete files from HP Web Jetadmin, and download or delete fonts.
	(See the software help for more information.)
FLASH IS	The flash DIMM is protected, and no new files can be written to it.
WRITE PROTECTED	Disable the write protection through HP Web Jetadmin.
INPUT DEVICE	An input paper handling device has a condition that needs attention
CONDITION xx.yy	before printing can resume.
	See the documentation that came with the paper handling device for
	assistance.
INSTALL TONER	The print cartridge has been removed and must be replaced for
CARTRIDGE	printing to continue.
INSTALL TRAY x	The printer is unable to print the current job, because the specified
	tray (x) is open or not inserted correctly.
	Re-insert the specified tray.
LOADING	Programs and fonts can be stored on the printer’s file system. At
PROGRAM <number>	bootup time these entities are loaded into RAM. (These entities can
alternates with	take a long time to load into RAM depending on the size and number
	of entities being loaded.) The <number> specifies a sequence
DO NOT POWER OFF	number indicating the current program being loaded.
MANUALLY FEED	Load the requested paper into Tray 1.
[TYPE] [SIZE]	Press [Go] if the desired paper is already loaded in Tray 1.
	Press [-Value+]to scroll through the available types and sizes. Press
	[Select] to accept the alternate type or size.

MEMORY FULL STORED DATA LOST

There is no available memory in the printer. The current job might not print correctly and some resources (such as downloaded fonts or macros) might have been deleted.

You might want to add more memory to the printer (page C-1).

ENWW

Chapter 4: Problem Solving 67