The following instructions are for loading standard sizes in a
Note
To avoid paper jams, do not load trays while the printer is printing.
1 Pull the tray completely out of the printer and place it on a flat surface.
2 Squeeze the release on the back of the rear paper guide. Slide the guide to the desired paper size.
3 Squeeze the release on the outside of the left guide and adjust the left and right guides to match the width of the paper. The guides should touch the paper without bending it.
4 Load the tray. For correct orientation, see page 39.
5 Make sure the paper is flat in the tray at all four corners and below the tabs on the guides.
Continued on the next page.
ENWW
Chapter 2: Printing Tasks 31