HP 5100tn, 5100dtn manual Loading Envelopes in Tray

Loading Envelopes in Tray 1

1 Open Tray 1 and pull out the tray

extension. If the envelopes are longer than 9 inches (229 mm), flip open the second tray extension.

2 Open the rear output bin and pull out the tray extension. (This reduces envelope curl and wrinkling.)

3 Load up to 10 envelopes in the center of Tray 1 with the side-to-be-printed facing up, and the postage-end toward the front of the tray. Slide the envelopes into the printer as far as they will go without forcing them.

4 Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the envelopes fit under the tabs on the guides.

ENWW

Chapter 2: Printing Tasks 41