HP manual EIO Menu 5100tn/5100dtn

EIO Menu (5100tn/5100dtn)

EIO (enhanced input/output) Menus depend on the particular accessory product installed in an EIO slot of the printer. If the printer contains an HP JetDirect print server EIO card, you can configure basic networking parameters using the EIO Menu. These and other parameters can also be configured through HP Web Jetadmin.

EIO Menu

Item	Values	Explanation
CFG NETWORK=NO	NO	NO: The JetDirect Menu is not accessible.
	YES	YES: The JetDirect Menu appears.
IPX/SPX=ON	ON	Select whether the IPX/SPX protocol stack (in
	OFF	Novell NetWare networks, for example) is
		enabled (on) or disabled (off).
DLC/LLC=ON	ON	Select whether the DLC/LLC protocol stack is
	OFF	enabled (on) or disabled (off).
TCP/IP=ON	ON	Select whether the TCP/IP protocol stack is
	OFF	enabled (on) or disabled (off).
ATALK=ON	ON	Select whether the Apple EtherTalk protocol
	OFF	stack is enabled (on) or disabled (off).
CFG IPX/SPX=NO	NO	NO: The IPX/SPX Menu is not accessible.
	YES	YES: The IPX/SPX Menu appears. In the IPX/
		SPX Menu, you can specify the frame type
		parameter used on your network. The default
		is AUTO, to automatically set and limit the frame
		type to the one detected.
		For Ethernet cards, frame type selections
		include EN_8023, EN_II, EN_8022,
		EN_SNAP.
		For Token Ring cards, frame type selections
		include TR_8022, TR_SNAP.
		In the IPX/SPX Menu for Token Ring cards, you
		can also specify NetWare Source Routing
		parameters, which include SRC RT=AUTO
		(default), OFF, SINGLE R, or ALL RT.

B-18 Control Panel Menus

ENWW