B A
A
5Align the rear guide with the desired paper size. With the guide angled slightly toward the front of the tray, insert the two front tabs (A) into the appropriate holes. Push the guide upright, snapping the center tab (B) into place.
The guide must always be placed correctly in the tray (even for 11 x 17 or A3 paper).
6Adjust the side guides to the proper size.
7Load the tray. For correct orientation, see page 32.
8Make sure the paper is flat in the tray at all four corners and below the tabs on the guides.
9Close the tray cover. Slide the tray back into the printer.
Note
If you want to print by type and size of paper from the printer driver, configure the tray settings in the printer’s control panel to match the type of paper loaded in each tray (page 47).
30 Chapter 2: Printing Tasks
ENWW