Note
To avoid paper jams, do not load trays while the printer is printing.
Tray 1 is a
100 sheets of paper, 10 envelopes, or
20 index cards. The printer might pull paper from Tray 1 first. To change this, see page 45. For supported sizes of paper, see page
1 Open Tray 1 and pull out the tray extension.
2 If the paper being loaded is longer than 9 in (229 mm), flip open the second tray extension.
3 Set the side guides to the desired size.
4 Load Tray 1. Paper should fit under the arrows and tabs on the guides. For correct orientation, see
• For example, load letter, A4, A5, Executive, and B5 size paper with the long edge toward the printer.
• Load other sizes of paper with the short edge toward the printer.
5 Make sure the guides touch the edges of the paper without bending it.
28 Chapter 2: Printing Tasks
ENWW