If the settings are not available from the software, set the custom paper size from the control panel:

1 From the Printing Menu set CONFIGURE CUSTOM PAPER=YES.

2 From the Printing Menu, select inches or millimeters as the unit of measurement.

3 From the Printing Menu, set the X dimension (the front edge of the paper) as shown in Figure 17. The X dimension can be 3 to

12.28inches (76 to 312 mm) for Tray 1 or 8.2 to 11.7 inches (148 to 297 mm) for the 500-sheet tray (optional). Set the Y dimension (the side edge of the paper) as shown in Figure 17. The Y dimension can be 5 to 18.5 inches (127 to 470 mm) for Tray 1 or

5.8to 17 inches (210 to 432 mm) for the 500-sheet tray (optional).

4 If custom paper is loaded into Tray 1 and TRAY 1 MODE=CASSETTE, then set TRAY 1 SIZE=CUSTOM from the Paper Handling Menu in the printer’s control panel. See “Customizing Tray 1 Operation” on page 45.

If custom paper is loaded in the optional 500-sheet tray, be sure the paper size dial is set to Custom.

5 In the software, select Custom as the paper size.

For example, if the custom paper is 8 by 10 inches (203 by 254 mm), set X=8 inches and Y=10 inches (X=203 millimeters and Y=254 millimeters).

ENWW

Chapter 2: Printing Tasks 51