Configuration Menu (Continued)
Item | Values | Explanation | |
|
|
| |
RAM DISK=AUTO | OFF | Determine how the RAM disk is configured. | |
| ON | This item appears only if there is no optional | |
| AUTO | hard disk installed and the printer has at least | |
| 8 MB of memory. | ||
|
| ||
|
| OFF: The RAM disk is disabled. | |
|
| ON: The RAM disk is enabled. Configure the | |
|
| amount of memory to be used through the | |
|
| following item: RAM DISK SIZE. | |
|
| Note | |
|
| If the setting is changed from OFF to ON or from | |
|
| OFF to AUTO, the printer will automatically | |
|
| reinitialize when it becomes idle. | |
|
|
| |
RAM DISK | 0K and up | Determine the size of the RAM disk. This item | |
SIZE=xxxK | (This value | appears if RAM DISK=ON or AUTO. | |
Press | |||
| depends on the | ||
| amount of | increments of 100. | |
| installed | Note | |
| memory.) | ||
| This setting cannot be changed if RAM | ||
|
| ||
|
| DISK=AUTO. Changing this value will cause | |
|
| the printer to reinitialize when it becomes idle. | |
|
|
| |
JAM RECOVERY= | AUTO | Determine how the printer behaves when a | |
AUTO | ON | paper jam occurs. | |
| OFF | AUTO: The printer automatically selects the | |
|
| best mode for printer jam recovery (usually ON). | |
|
| This is the default setting. | |
|
| ON: The printer automatically reprints pages | |
|
| after a paper jam is cleared. | |
|
| OFF: The printer does not reprint pages | |
|
| following a paper jam. Printing performance | |
|
| might be increased with this setting. | |
|
|
| |
MAINTENANCE | OFF | This item appears only after the PERFORM | |
MESSAGE=OFF |
| PRINTER MAINTENANCE message displays. | |
|
| OFF: The PERFORM PRINTER MAINTENANCE | |
|
| message will be cleared and will not be | |
|
| displayed again until the next maintenance is | |
|
| due. | |
|
| The message should not be turned off unless | |
|
| the printer maintenance has been performed. | |
|
| If the required maintenance is not performed, | |
|
| the printer’s performance will degrade. |
ENWW