EIO Menu (Continued)
Item | Values | Explanation |
|
|
|
CFG TCP/IP=NO | NO |
| YES |
NO: The TCP/IP Menu is not accessible.
YES: The TCP/IP Menu appears. In the TCP/ IP Menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO , you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). For example:
Byte 1 | 192.0.0.192 | Byte 4 |
|
|
| Byte 2 | Byte 3 |
|
| If the Syslog Server IP address is left blank, the | ||
|
| printer will still work. Also, you can manually set | ||
|
| the Timeout time period. | ||
|
|
| ||
CFG LINK=NO | NO | NO: The | ||
| YES | menu will not be accessed. | ||
|
| YES: Allows you to access and manually set | ||
|
| |||
|
| • AUTO: (Default) The print server will | ||
|
|
| automatically configure itself to match the | |
|
|
| network’s link speed and communication | |
|
|
| mode. |
|
|
| • | 10T HALF: Sets 10 Mbps, | |
|
|
| operation on the print server. | |
|
| • | 10T FULL: Sets 10 Mbps, | |
|
|
| operation on the print server. | |
|
| • | 100TX HALF: Sets 100 Mbps, | |
|
|
| operation on the print server. | |
|
| • | 100TX FULL: Sets 100 Mbps, | |
|
|
| operation on the print server. | |
|
|
|
|
|
|
|
|
|
|
ENWW
Chapter : 19