Loading Tray 2

The following instructions are for loading Tray 2 or an optional 250-sheet paper tray. For supported sizes of paper, see page A-5.

Note

To avoid paper jams, do not load trays while the printer is printing.

1 Pull the tray completely out of the printer. Lift the tray cover.

2 Rotate the dial in the tray so the printer will read the correct size of paper. The toggle switch accesses more sizes. An error might occur if the dial is not set properly.

Note

Setting the dial adjusts the printer’s sensors. It does not adjust the guides inside the tray.

3 Make sure the paper size setting matches the size of paper loaded, or the printer might jam or other errors might occur.

4 Tilt the blue rear guide toward the front of the tray to detach it.

Continued on the next page.

ENWW

Chapter 2: Printing Tasks 29