Printer Messages (Continued)
Message | Explanation or Recommended Action | |
|
| |
MEMORY SETTINGS | The printer changed its memory settings because it did not have | |
CHANGED | enough memory to use the previous settings for I/O Buffering and | |
| Resource Saving. This usually occurs after removing memory from | |
| the printer, adding a duplexer, or adding a printer language. | |
| You might want to change memory settings for I/O Buffering and | |
| Resource Saving (although default settings are usually best) or add | |
| ||
|
| |
MEMORY SHORTAGE | The printer did not have enough free memory to print the entire job. | |
JOB CLEARED | The remainder of the job will not print and will be cleared from | |
| memory. | |
| Press [Go] to continue. | |
| Change the Resource Saving setting from the printer’s control panel | |
| ||
|
| |
MEMORY SHORTAGE | The printer had to compress the job in order to fit it in available | |
PAGE SIMPLIFIED | memory. Some data loss might have occurred. | |
| Press [Go] to continue. | |
| You might want to add more memory to the printer (page | |
|
| |
MOPY PAGE TOO | The data (dense text, rules, raster or vector graphics) sent to the | |
COMPLEX | printer was too complex. | |
alternates with | Press [Go] to print the transferred data. (Some data might be lost.) | |
PRESS GO TO | ||
If this message appears often, simplify the print job. | ||
CONTINUE | ||
| ||
|
| |
OFFLINE | Press [Go] to place the printer online. | |
|
| |
OUTPUT BIN FULL | The output bin is full and needs to be emptied. | |
CLEAR (BIN nnn) |
| |
n (bin name) |
|
PERFORM PRINTER MAINTENANCE
RAM | DISK DEVICE | The RAM disk had a critical failure and can no longer be used. |
FAILURE | Turn the printer off, and then turn the printer on to clear the message. | |
|
|
|
RAM | DISK FILE | The requested operation could not be performed. You might have |
OPERATION FAILED | attempted an illegal operation, such as trying to download a file to a | |
|
| |
68 Chapter 4: Problem Solving
ENWW