![](/images/backgrounds/286767/hp-laserjet-5100dtn-users-manual-549103130x1.png)
Card Stock Construction
•Smoothness:
•Construction: Card stock should lie flat with less than 0.2 inch (5 millimeters) of curl.
•Condition: Make sure card stock is not wrinkled, nicked, or otherwise damaged.
•Sizes: Use only card stock within the following size ranges:
•minimum: 3 by 5 inches (76 by 127 mm)
•maximum: 12.28 by 18.5 inches (312 by 470 mm)
Note | Before loading card stock in Tray 1, make sure it is regular in shape |
| and not damaged. Also, make sure the cards are not stuck together. |
|
|
Card Stock Guidelines
•If cards curl or jam, try printing from Tray 1 and opening the rear output bin.
•Set margins at least 0.08 inch (2 mm) away from the edges of the paper.
ENWW