Items in this menu affect the printer’s behavior. Configure the printer according to your printing needs.
Configuration Menu
Item | Values | Explanation |
|
|
|
POWERSAVE= | OFF | Set the printer to enter PowerSave after it has |
30 MINUTES | 15 MINUTES | been idle for a specified amount of time. |
| 30 MINUTES | Turning PowerSave off is not recommended. |
| The PowerSave feature does the following: | |
| 1 HOUR | |
| • Minimizes the amount of power consumed | |
| 2 HOURS | |
| by the printer when it is idle. | |
| 3 HOURS | |
| • Reduces wear on the printer’s electronic | |
|
| |
|
| components. (Turns off the display’s |
|
| backlight.) |
|
| When you send a print job, press a control |
|
| panel key, open a paper tray, or open the top |
|
| cover, the printer automatically comes out of |
|
| PowerSave mode. |
|
| Note |
|
| PowerSave turns off the backlight on the |
|
| display, but the display is still readable. |
|
|
|
PERSONALITY= | AUTO | Select the default printer language |
AUTO | PCL | (personality). Possible values are determined |
| PS | by which valid languages are installed in the |
| printer. | |
|
| |
|
| Normally you should not change the printer |
|
| language (the default is AUTO). If you change |
|
| it to a specific printer language, the printer will |
|
| not automatically switch from one language to |
|
| another unless specific software commands |
|
| are sent to the printer. |
ENWW | Control Panel Menus |