HP 610 G1 manual Jita Configuration, Removing settings for a user or a group

4.Click Deny next to the group to be denied access.

5.Navigate to the specific device to which access is to be allowed for the user in the device list.

6.Click Add.

The Select Users or Groups dialog box opens.

7.Click Advanced, and then click Find Now to search for users or groups to add.

8.Click a user to be allowed access, and then click OK.

9.Click Allow to grant this user access.

10.Click Apply.

Removing settings for a user or a group

To remove permission for a user or a group to access a device or a class of devices, follow these steps:

1.In the left pane of HP ProtectTools Administrative Console, click Device Access Manager, and then click Device Class Configuration.

2.In the device list, click the device class that you want to configure.

●Device class

●All devices

●Individual device

3.Under User/Groups, click the user or group you want to remove, and then click Remove.

4.Click Apply.

Resetting the configuration

CAUTION: Resetting the configuration discards all device configuration changes that have been made and returns all settings to the values set at the factory.

NOTE: The Advanced Settings page is not reset.

To reset the configuration settings to the factory values:

1.In the left pane of HP ProtectTools Administrative Console, click Device Access Manager, and then click Device Class Configuration.

2.Click Reset.

3.Click Yes to the confirmation request.

4.Click Apply.

JITA Configuration

JITA Configuration allows the administrator to view and modify lists of users and groups that are allowed to access devices using just-in-time authentication (JITA).

Setup Procedures 51