HP 610 G1 manual Settings, Managing users, Credentials, Session Policy

8.To return to the original settings, click Restore Defaults.

9.Click Apply.

Session Policy

To define policies governing the credentials required to perform authentication during a Windows session:

1.In the left panel of Administrative Console, click Security, and then click Authentication.

2.On the Session Policy tab, select a user category, such as Administrators or Standard users.

3.Click an authentication credential to display the edit dialog.

4.To require a combination of two authentication credentials, click the down arrow to select each credential, and then click OK.

5.To remove a credential, click the X, or right-click the credential, and then click Delete.

6.Click Yes on the configuration dialog.

7.To confirm whether users can log on, click Check that HP ProtectTools can log on.

8.To return to the original settings, click Restore Defaults.

9.Click Apply.

Settings

To allow users of this computer to skip Windows logon if authentication was already performed at the BIOS level or at the Drive Encryption level:

1.In the left panel of Administrative Console, click Security, and then click Settings.

2.Allow One Step logon—Select the check box to enable One Step logon, or clear the check box to disable it.

3.Click Apply.

Managing users

Within the Users application, you can monitor and manage this computer's HP ProtectTools users.

All HP ProtectTools users are listed and verified against the policies set through Security Manager, and whether or not they have registered the appropriate credentials enabling them to meet those policies.

To manage users, select from the following settings:

●To add additional users, click Add.

●To delete a user, click the user, and then click Delete.

●To set up additional credentials for the user, click the user, and then click Enroll.

●To view the policies for a specific user, select the user, and then view the policies in the lower window.

Credentials

Within the Credentials application, you can configure settings available for any built-in or attached security devices recognized by HP ProtectTools Security Manager.

Configuring your system 17