Additional information
Setting the TV system
If the picture of the disc being played is distorted, switch the TV system to the one used in your country or region.
When the TV system is switched, the types of discs that can be played are limited.
The factory default setting is AUTO.
1Turn the player’s power off. Press STANDBY/ON.
2Press STANDBY/ON while pressing
.
Use the buttons on the player’s front panel. The power turns on and the TV system switches as shown below.
AUTONTSC
NTSCPAL
PALAUTO
Types of | Format | Player setting |
| ||
discs/files | NTSC | PAL | AUTO | ||
| |||||
| NTSC | NTSC | PAL | NTSC | |
| PAL | NTSC | PAL | PAL | |
| — | NTSC | PAL | NTSC or | |
| PAL | ||||
|
|
|
| ||
no disc |
|
|
|
| |
|
|
|
| | |
Appendix
06
Cautions on use | English |
| |
When moving the player |
|
When moving the player, check first that there is no disc loaded and that the disc tray is closed. Then press STANDBY/ON on the player (or STANDBY/ON on the remote control), wait for the - OFF - indicator on the front panel display to turn off, then unplug the power cord. Moving the player with a disc inside it could result in damage.
Place of installation
Choose a stable place near the TV or ste- reo system being used with the player.
Do not place the player on top of a TV or color monitor. Also install it away from cassette decks and other devices easily affected by magnetic forces.
Avoid the following types of places:
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot places
Places exposed to vibrations
Dusty places
Places exposed to soot, steam or heat (kitchens, etc.)
Do not place objects on the player.
Do not place any objects on top of the player.
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds, sofas, etc., or wrapped in cloth, etc. Doing so will prevent the heat from dispersing, leading to damage.
Do not expose to heat.
Do not place the player on top of an ampli- fier or other component that generates heat. When placing it in a rack, to avoid the heat given off by the amplifier or other audio component, place it on a shelf below the amplifier.
En 43
