8.Loop the ribbon over the Print Head Module. Insert the Take-up Core into the Take-Up Area by first compressing the right side spring and snapping the left side of take-up core into the left side of the notched wheel. Make sure that the slots in left side of the core mate with the notches on the left side ribbon drive wheel.
Take-Up Core
Ink Side of the Ribbon
Print Head Module
Figure 13 – Ribbon Take-Up Installation
9.To remove any slack in the ribbon, manually rotate the Take-up Core Wheeluntil the ribbon from the Supply Holder is snug around the Print head Module and onto the Take- up Core .
Take-Up Core Wheel
Figure 14 – Ribbon Installation
Fastmark 600 Series User's Guide | 22 |
