8.Once the media comes out of the larger slot, gently roll the excess media back onto the Media Roll until the Backing is snug around the Peel Bar.
9.In this position the Media Backing coming out of the large slot in the front cover should be aligned with the Labels coming out of the printer.
Note: If not, then pull down the Peeler Latch and gently pull the backing until they are aligned. Make sure to close the Peeler Latch when done.
10.Close and lock the print head module by pressing firmly until the right and left Print Head Latches snap shut.
11.Close the Media Access Cover.
12.Press the Feed Button until the first label is peeled off.
Note: In this position the trailing edge of the media may be caught between the Platen and the Printhead and will not be removable until the next printing. Verify that all Peeler Features in the Setup Menu are properly set (BackFeed, Present Distance, and Peeler Sensor) for your application.
Figure 27 – Peeler Option
Fastmark 600 Series User's Guide | 30 |
