Boot Mode Feature and Value List
The Boot Mode has several programmable features that are used during firmware updates. Click the Display Up/Down buttons to access the Boot mode features.
FEATURE NAME | VALUE RANGE | DESCRIPTION |
|
|
|
Download New F/W | N/A | Click the Enter button to start download mode. The |
|
| display will change to: |
|
| Download New F/W |
|
| Waiting For Data / <CANCEL to Stop> |
|
| The printer will wait on a firmware update file on the |
|
| Parallel ports. The FlashWiz Lite section of the Feature- |
|
| Man program is used to download firmware files. |
|
|
|
Reboot System | N/A | To exit boot mode and return to normal PALTM firmware |
|
| mode, click the Enter button. After a firmware update is |
|
| complete, this feature is automatically selected and allows |
|
| the printer to be rebooted with the newly loaded firmware. |
|
|
|
Interface Select |
| Identical to feature in standard setup mode. |
|
|
|
COM1: Baud Rate |
| Defaults to 57K baud when in boot mode. Change to |
|
| match host if needed. |
|
|
|
COM1: Parity |
| Change to match host if needed. |
|
|
|
COM1: Data Bits |
| Change to match host if needed. |
|
|
|
COM1: Handshake |
| Change to match host if needed. |
|
|
|
Firmware Rev. |
| Displays revision of boot code currently loaded. The boot |
|
| code can only be updated by changing Flash chips located |
|
| on main board. |
|
|
|
Fastmark 600 Series User's Guide | 89 |
