Appendix E: HIDDEN SETUP FEATURES
To access the hidden list of features, select the Firmware Rev. feature then click the Enter button twice. The hidden feature list is now enabled and may be selected by clicking the Display Down button.
Hidden Setup Feature and Value List
FEATURE NAME | VALUE RANGE | DESCRIPTION |
|
|
|
Ripple Pattern | N/A | Click the Enter button to initiate a rolling ASCII ripple |
|
| pattern. |
|
|
|
Factory Defaults | N/A | Clicking the Enter button resets all keypad features to |
|
| factory defaults. If the RTC clock is installed, these features |
|
| are not reset. The Label Count Feature can not be reset. |
|
| Caution: This feature could cause a loss of communication |
|
| with host if interface features have been modified. |
|
|
|
PAL Boot Drive | [A:,B:,C:, Auto Detect] | This feature selects the boot drive. During power up the |
|
| system will scan the boot drive for a PAL program to run. If |
|
| Auto Detect is selected the system will scan all drives in |
|
| succession, starting with A:, searching for the first PAL |
|
| program to run. |
|
|
|
F/W Update Mode | N/A | Clicking the Enter button causes main firmware control to |
|
| be halted and boot load firmware to be loaded. This mode |
|
| has a distinct setup mode feature list allowing serial port |
|
| parameters to be adjusted for the firmware download. See |
|
| Appendix F on firmware updates for more information. |
|
|
|
Max Media Length | This feature sets the maximum length media that the printer | |
|
| will recognize. In normal setup mode, this value sets the |
| upper limit on the Media Length feature to avoid excessive | |
|
| menu scrolling. This also controls how long of a label the |
|
| printer will look for when performing a label calibration. |
|
| Increase this value if media over 12 inches long is used. |
|
|
|
Keypad Lockout | [Enabled, Disabled] | When Keypad Lockout is Enabled, the value of features may |
|
| be viewed but not changed. Also, any feature value which |
|
| TM |
|
| may be changed from downline using a PAL operator is |
|
| also locked out from change. This feature may be used to |
|
| keep users from modifying features or to override host |
|
| changes if needed. |
|
|
|
Label Count | N/A | This feature displays the number of labels printed since the |
|
| printer was manufactured. The total label length issued by |
|
| the printer will be dependant on the label length used. For |
|
| example if 4 inch label stock is used and the Label Count |
|
| feature indicates 100, then 400 inches of media have been |
|
| printed. |
|
|
|
Fastmark 600 Series User's Guide | 86 |
