5. Position the Media Backing out of the printer and over the Peel Bar.
Label | Media Stock from Media Roll |
Backing
Peeler Bar
Peeler Roller
Platen Roller
Figure 25 – Feeding into the Peeler Mechanism
6.Push the Media Backing in the slot just under the Peel Bar and between the front cover. Continue to push the stock until it comes out of the larger slot in the front cover.
Figure 26 – Backing Exit Position
7. If the Media Backing will not push through, then Press the Feed button one time.
Fastmark 600 Series User's Guide | 29 |
