Pioneer PIONDV320S OUT COAXIAL/OPTICAL terminals, set, Digital Out to On, 36 En

Appendix

06Additional information

Problem Check Remedy

Sound is not produced or is distorted.

Is the pause, frame-by-frame	No sound is output during pause, frame-
forward or reverse, or slow play	by-frame forward/reverse or slow motion
mode set?	playback.
Are the connected devices (AV	Refer to the TV’s operating instructions and
receiver or amplifier, etc.) properly	check the settings (volume, input, speaker
set?	settings, etc.).

Is the disc scratched?	Scratched discs may not play.
Is the disc dirty?	Wipe the dirt off the disc (page 44).
Are the audio cords properly con-	Connect the cord properly, inserting the
nected?	plug all the way in.
Are the audio cords damaged?	If the audio cord is damaged, replace it with
	a new cord.

Is the player properly connected to the other devices (AV receiver or amplifier, etc.)?

Check whether you are mistakenly con- nected to the other device’s audio output terminals, etc.

Check whether you are mistakenly con- nected to the AV receiver or amplifier’s PHONO input terminals, etc.

	Is the other device (AV receiver or	When connected to the DIGITAL AUDIO
	amplifier, etc.) connected to the	OUT (COAXIAL/OPTICAL) terminals, set
	DIGITAL AUDIO OUT (COAXIAL/	Digital Out to On (page 28).
	OPTICAL) terminals?	Refer to the connected AV receiver or ampli-
		fier’s operating instructions and check the
		audio signals it supports.
		Set Digital Audio Out according to the
		audio signals supported by the AV receiver
		or amplifier, etc. (page 28).
96 kHz/88.2 kHz digital audio	Is Digital Out set to On?	When connected to the DIGITAL AUDIO
signals are not output from the		OUT (COAXIAL/OPTICAL) terminals, set
DIGITAL AUDIO OUT		Digital Out to On (page 28).
(COAXIAL/OPTICAL) termi-
nals.
Multichannel audio signals are	Is the audio output properly set	Refer to the connected AV receiver or ampli-
not output.	on the connected AV receiver or	fier’s operating instructions and check the
	amplifier, etc.?	audio output settings.
		Switch the disc’s audio to multichannel
		audio using the menu screen or AUDIO.
	Is Digital Audio Out set to audio	Refer to the connected AV receiver or ampli-
	signals the AV receiver or ampli-	fier’s operating instructions and check the
	fier, etc., supports?	audio signals it supports.
		Set Digital Audio Out according to the
		audio signals supported by the AV receiver
		or amplifier, etc. (page 28).

36En