2.Remove the slot cover (if installed).
CAUTION:
Properly ground yourself before handling the switch.
3.Press the handle latch to release the installation handle. See Figure 4.
1
scale: 2/3" = 1"
23
| 20 |
| 19 |
| 18 |
17 | 2 |
Reset
3 26475a
Figure 4 Releasing the installation handle
Table 9 Release mechanism components
Item
1
2
3
Description
Installation handle in latched position
Handle latch
Installation handle (released)
NOTE:
The Brocade 8Gb SAN Switch is a
4.Align the Brocade 8Gb SAN Switch with the appropriate interconnect bay according to your enclosure’s specific configuration. Push the switch firmly into the interconnect bay. See Figure 5.
Brocade 8Gb SAN Switch for HP BladeSystem | 21 |