HP 5697-7483 manual Dls, Domain ID, Edtov, Fcia FCP, FCS switch Fibre Channel fill word

Page 54

DLS

domain ID

E_D_TOV

E_Port

EE_Credit

EIA rack

enabled zone configuration

end-to-end flow control

error

exchange

F_Port

fabric

fabric name

FCIA

FCP

FCS switch

Fibre Channel

fill word

Dynamic load sharing. Dynamic distribution of traffic over available paths. Allows for recomputing of routes when an Fx_Port or E_Port changes status.

Unique identifier used in routing frames for all switches in a fabric. Usually assigned by the principal switch, but can be assigned manually. The domain ID for an HP switch can be any integer between 1 and 239. The default domain ID is usually 1.

Error-detect time-out value. The minimum time a target waits for a sequence to complete before initiating recovery. Can also be defined as the maximum time allowed for a round-trip transmission before an error condition is declared.

Expansion port. A type of switch port that can be connected to an E_Port on another switch to create an ISL. See also ???, ???.

End-to-end credit. The number of receive buffers allocated by a recipient port to an originating port. Used by Class 1 and Class 2 services to manage the exchange of frames across the fabric between source and destination.

A storage rack that meets the standards set by the Electronics Industry Association (EIA).

The currently enabled configuration of zones. Only one configuration can be enabled at a time. See also ???, ???.

A facility that governs flow of class 1 and class 2 frames between N_Ports.

With respect to FC, a missing or corrupted frame, time-out, loss of synchronization, or loss of signal (link error).

The highest-level FC mechanism used for communication between N_Ports. Composed of one or more related sequences; can work in one or both directions.

Fabric port. A port that is able to transmit under fabric protocol and interface over links. Can be used to connect an N_Port to a switch. See also ???.

An FC network containing two or more switches in addition to hosts and devices. May also be called a switched fabric.

The unique identifier assigned to a fabric and communicated during login and port discovery.

Fibre Channel Industry Association. An international organization of FC industry professionals. Among other things, provides oversight of ANSI and industry standards.

Fibre Channel Protocol. Mapping of protocols onto the FC standard protocols. For example, SCSI FCP maps SCSI-3 onto FC.

Fabric Configuration Server switch. One or more designated HP switches that store and manage the configuration and security parameters for all switches in the fabric.

The primary protocol for building SANs to transmit data between servers, switches, and storage devices. Unlike IP and Ethernet, Fibre Channel is designed to support the needs of storage devices of all types. It is a high-speed, serial, bidirectional, topology-independent protocol, and is a highly scalable interconnection between computers, peripherals, and networks.

An IDLE or ARB ordered set that is transmitted during breaks between data frames to keep the link active.

54 Glossary

Image 54
Contents Brocade 8Gb SAN Switch for HP BladeSystem c-Class Page Contents SAN Switch technical specifications Managing the 8Gb SAN SwitchRegulatory compliance and safety Electrostatic dischargeIndex Figures Tables Page Intended audience SAN Switch related documentationAbout this guide HP BladeSystem c-Class related documentationDocument conventions Document conventions and symbolsHP contact information Convention ElementDocumentation feedback Subscription serviceOther HP websites TIPAbout this guide 8Gb SAN Switch features OverviewComponent identification Item number Description8Gb SAN Switch redundancy 8Gb SAN Switch licensingInternal ports summary Optional software kits ISL trunking groupsSupported optional software Option Part numberOptional Long Wave 4Gb SFPs Supported SFP transceiver optionsThrough lists the only supported SFPs Distance OM2 Cable OM3 CableOverview Setup Shipping carton contentsInstalling multiple switches Installation and safety considerationsInstall the 8Gb SAN Switch Electrical considerationsScale 2/3 = OA power verification Check LEDsSet the switch Ethernet IP address Using Enclosure Bay IP Addressing EbipaUsing external Dhcp Setting the IP address manuallyConfigure the 8Gb SAN Switch Connect to the Command Line InterfaceItems required for configuration Setting the date and time Verifying installed licensesDisabling and enabling a switch Modifying the FC domain ID optionalEnter a unique domain ID. For example Using Dynamic Ports On Demand Dpod Dpod commandsDisabling and enabling a port Example for Brocade 8/12 SAN Switch Verifying the configurationEnter fabricshow to get general information about the fabric Backing up the configuration8Gb SAN Switch management features Managing the 8Gb SAN SwitchManagement features Management tool Out-of-band support In-band supportConnecting with a management station Maintaining the 8Gb SAN SwitchInstalling dust covers in empty ports Replacing an SFP transceiverPowering on and off Diagnostic testsOrient the SFP with the appropriate port. See and Table Interpreting LED activity LED indicatorsItem Number Description LED indicators LED patternsModule Status LED patterns during normal operation Module status LED patternsPort link status LED patterns Port link status LED patternsPost and boot specifications BootInterpreting Post results Firmware update About the reset buttonReplacing a faulty 8Gb SAN Switch Rebooting the switchBrocade 8Gb SAN Switch for HP BladeSystem c-Class Managing the 8Gb SAN Switch Regulatory compliance identification numbers Regulatory compliance and safetyRegulatory compliance Laser device complianceInternational notices and statements Canadian notice avis CanadienEuropean union regulatory notice Bsmi notice Japanese notice Taiwan battery recycling notice SafetyBattery replacement notice Korean noticePower cords Japanese power cord statementRegulatory compliance and safety Grounding methods How to prevent electrostatic dischargeElectrostatic discharge This appendix provides the following informationElectrostatic discharge General specifications SAN Switch technical specificationsGeneral specifications Specification DescriptionEnvironmental requirements Weight and physical dimensions8Gb SAN Switch physical dimensions Environmental requirementsSupported SFPs Supported HBAsSAN Switch technical specifications Glossary Domain ID FCS switch Fibre Channel fill wordDLS EdtovFSP FlogiFRU FspfLpsm LIPLmtov LWLRAID PlogiRatov RrtovSdram RscnSAN SnmpWWN Fabric has a distinct WWNGlossary Trunking groups IndexISL LEDTransceiver, 13, 14, 25, 33, 35

5697-7483 specifications

The HP 5697-7483 is an advanced printer that has earned recognition for its exceptional performance and efficiency in both office and home environments. Leveraging cutting-edge technologies, it addresses the needs of professionals and casual users alike, ensuring high-quality output with each print job.

One of the standout features of the HP 5697-7483 is its impressive print resolution, which can reach up to 4800 x 1200 dpi. This level of detail is crucial for producing sharp text and vibrant images, making it suitable for everything from business documents to creative projects. The printer employs HP's ColorSphere technology, which enhances color accuracy and consistency across a variety of media types.

Speed is another important aspect of the HP 5697-7483. With a print speed of up to 28 pages per minute for black and white documents, and up to 24 pages per minute for color, it meets the demands of fast-paced work environments. Additionally, the printer is equipped with a 250-sheet input tray, allowing for long print runs without the need for frequent paper replenishment.

Connectivity is a key feature of the HP 5697-7483, offering users multiple options to print effortlessly. It supports USB, Ethernet, and wireless connections, enabling seamless integration into a wide range of setups, whether in an office network or for remote printing from laptops and mobile devices. The printer also features HP Smart app compatibility, which provides users with a user-friendly interface to manage their print jobs, check ink levels, and receive alerts.

Durability and reliability are hallmarks of the HP 5697-7483. Its design ensures that it can handle high volume printing while maintaining the quality of output. Additionally, HP's commitment to sustainability is evident in this model, as it utilizes energy-saving features and is compatible with recycled cartridges.

In conclusion, the HP 5697-7483 combines high-resolution printing, fast speeds, versatile connectivity, and user-friendly features, making it a standout choice for individuals and businesses seeking a reliable printing solution. Its advanced technologies and characteristics cater to the diverse needs of modern-day printing, ensuring every job is completed efficiently and effectively.