HP 5697-7483 manual Weight and physical dimensions, Environmental requirements

Specification	Description
	• IEC 61000-4-2 Severity Level 3 for Electrostatic Discharge
	• IEC 61000-4-3 Severity Level 3 for Radiated Fields
	• IEC 61000-4-4 Severity Level 3 for Fast Transients
	• IEC 61000-4-5 Severity Level 3 for Surge Voltage
EMC immunity	• IEC 61000-4-6 Conducted Emissions
	• IEC 61000-4-11 Voltage Variations
	• EN 61000-4-12 Oscillatory Waves Immunity
	• EN 61000-3-2 Limits for Harmonic Current Emissions
	• EN 61000-3-3 JEIDA
System architecture	Nonblocking shared-memory switch
ANSI protocol	FC-PH (FC Physical and Signalling Interface standard)
Modes of operation	FC Class 2, Class 3, and Class F
Maximum frame size	2112-byte
Port-to-port latency	Less than 2 microseconds with no contention (destination
	port is free)

Weight and physical dimensions

Table 19 lists physical properties.

Table 19 8Gb SAN Switch physical dimensions

Dimension	Measurement
Height	29.3 mm (1.15 in)
Width	208 mm (8.19 in)
Depth	280 mm (11.02 in)
Weight	1.27 kg (2.8 lb)

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 20 list the acceptable environment for both operating and nonoperating conditions.

Table 20 Environmental requirements

Condition	Acceptable range during operation	Acceptable range during
		non-operation
Ambient	104°F/40 °C at sea level, derated 1 C	-40°C to 70°C with maximum rate of
temperature	per 1000 ft above sea level	change of 20 C /hr
Humidity	5% to 90% relative humidity,	50% to 80% relative humidity,
	non-condensing	non-condensing
Altitude	0 to 10,000 ft (3 km) above sea level	0 to 40,000 ft (12 km) above sea level
Shock	40 G, 2mS duration	140 G, 2mS,
Vibration	0.5 G, 10–500 Hz	2.0 G, 5–500 Hz
Airflow	47 cubic ft/minute	None required

50 SAN Switch technical specifications