HP 5697-7483 manual Replacing a faulty 8Gb SAN Switch, Rebooting the switch

Page 38

1

2

17

18

19

20

!

 

 

 

Reset

 

 

 

 

 

 

26478a

Figure 9 Locating the Reset button

Table 17 Locating the reset button

Item

1

2

Description

Port side of switch

Reset button

Rebooting the switch

Depress the Reset button for up to 5 seconds to reboot the switch.

Replacing a faulty 8Gb SAN Switch

To replace a faulty switch in the c-Class enclosure:

IMPORTANT:

For supplemental information on any of these steps, refer to the latest HP StorageWorks Fabric OS administrator guide and Fabric OS Advanced Web Tools administrator guide, available at the HP website:

http://www.hp.com/support/manuals

To access the guides, scroll to the storage section of the web page, and select Storage Networking for HP StorageWorks products.

In addition to these guides, refer to the Brocade 8Gb SAN Switch for HP c‐Class BladeSystem—Setup, Configuration and Installation Procedures available on http://www.hp.com for initial installation instructions of the new switch.

1.Create a backup of the existing configuration file.

NOTE:

It is critical to back up the switch configuration to a remote server on a regular basis. Repeat for each switch in your SAN whenever configuration changes occur. Configuration backups can be done with the CLI, integrated Web Tools GUI, or the optional Fabric Manager GUI.

2.Locate the faulty switch.

3.Disconnect all external Fibre Channel cables.

4.Remove the faulty 8Gb SAN Switch from the enclosure.

5.Insert the replacement switch into the enclosure.

6.Log in to the Onboard Administrator CLI.

38 Managing the 8Gb SAN Switch

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Brocade 8Gb SAN Switch for HP BladeSystem c-Class Page Contents SAN Switch technical specifications Managing the 8Gb SAN SwitchRegulatory compliance and safety Electrostatic dischargeIndex Figures Tables Page Intended audience SAN Switch related documentationAbout this guide HP BladeSystem c-Class related documentationDocument conventions Document conventions and symbolsHP contact information Convention ElementDocumentation feedback Subscription serviceOther HP websites TIPAbout this guide 8Gb SAN Switch features OverviewComponent identification Item number DescriptionInternal ports summary 8Gb SAN Switch redundancy8Gb SAN Switch licensing Optional software kits ISL trunking groupsSupported optional software Option Part numberOptional Long Wave 4Gb SFPs Supported SFP transceiver optionsThrough lists the only supported SFPs Distance OM2 Cable OM3 CableOverview Setup Shipping carton contentsInstalling multiple switches Installation and safety considerationsInstall the 8Gb SAN Switch Electrical considerationsScale 2/3 = OA power verification Check LEDsSet the switch Ethernet IP address Using Enclosure Bay IP Addressing EbipaUsing external Dhcp Setting the IP address manuallyItems required for configuration Configure the 8Gb SAN SwitchConnect to the Command Line Interface Setting the date and time Verifying installed licensesEnter a unique domain ID. For example Disabling and enabling a switchModifying the FC domain ID optional Disabling and enabling a port Using Dynamic Ports On Demand DpodDpod commands Example for Brocade 8/12 SAN Switch Verifying the configurationEnter fabricshow to get general information about the fabric Backing up the configuration8Gb SAN Switch management features Managing the 8Gb SAN SwitchManagement features Management tool Out-of-band support In-band supportConnecting with a management station Maintaining the 8Gb SAN SwitchInstalling dust covers in empty ports Replacing an SFP transceiverOrient the SFP with the appropriate port. See and Table Powering on and offDiagnostic tests Interpreting LED activity LED indicatorsItem Number Description LED indicators LED patternsModule Status LED patterns during normal operation Module status LED patternsPort link status LED patterns Port link status LED patternsInterpreting Post results Post and boot specificationsBoot Firmware update About the reset buttonReplacing a faulty 8Gb SAN Switch Rebooting the switchBrocade 8Gb SAN Switch for HP BladeSystem c-Class Managing the 8Gb SAN Switch Regulatory compliance identification numbers Regulatory compliance and safetyRegulatory compliance Laser device complianceInternational notices and statements Canadian notice avis CanadienEuropean union regulatory notice Bsmi notice Japanese notice Taiwan battery recycling notice SafetyBattery replacement notice Korean noticePower cords Japanese power cord statementRegulatory compliance and safety Grounding methods How to prevent electrostatic dischargeElectrostatic discharge This appendix provides the following informationElectrostatic discharge General specifications SAN Switch technical specificationsGeneral specifications Specification DescriptionEnvironmental requirements Weight and physical dimensions8Gb SAN Switch physical dimensions Environmental requirementsSupported SFPs Supported HBAsSAN Switch technical specifications Glossary Domain ID FCS switch Fibre Channel fill wordDLS EdtovFSP FlogiFRU FspfLpsm LIPLmtov LWLRAID PlogiRatov RrtovSdram RscnSAN SnmpWWN Fabric has a distinct WWNGlossary Trunking groups IndexISL LEDTransceiver, 13, 14, 25, 33, 35

5697-7483 specifications

The HP 5697-7483 is an advanced printer that has earned recognition for its exceptional performance and efficiency in both office and home environments. Leveraging cutting-edge technologies, it addresses the needs of professionals and casual users alike, ensuring high-quality output with each print job.

One of the standout features of the HP 5697-7483 is its impressive print resolution, which can reach up to 4800 x 1200 dpi. This level of detail is crucial for producing sharp text and vibrant images, making it suitable for everything from business documents to creative projects. The printer employs HP's ColorSphere technology, which enhances color accuracy and consistency across a variety of media types.

Speed is another important aspect of the HP 5697-7483. With a print speed of up to 28 pages per minute for black and white documents, and up to 24 pages per minute for color, it meets the demands of fast-paced work environments. Additionally, the printer is equipped with a 250-sheet input tray, allowing for long print runs without the need for frequent paper replenishment.

Connectivity is a key feature of the HP 5697-7483, offering users multiple options to print effortlessly. It supports USB, Ethernet, and wireless connections, enabling seamless integration into a wide range of setups, whether in an office network or for remote printing from laptops and mobile devices. The printer also features HP Smart app compatibility, which provides users with a user-friendly interface to manage their print jobs, check ink levels, and receive alerts.

Durability and reliability are hallmarks of the HP 5697-7483. Its design ensures that it can handle high volume printing while maintaining the quality of output. Additionally, HP's commitment to sustainability is evident in this model, as it utilizes energy-saving features and is compatible with recycled cartridges.

In conclusion, the HP 5697-7483 combines high-resolution printing, fast speeds, versatile connectivity, and user-friendly features, making it a standout choice for individuals and businesses seeking a reliable printing solution. Its advanced technologies and characteristics cater to the diverse needs of modern-day printing, ensuring every job is completed efficiently and effectively.
Top Page Image Contents