HP LP 2000r HP Rackmount Flat Panel Monitor and Keyboard, HP Rack System/E Vertical Extension Kit

HP Netserver High Density Rack Solutions Overview (LP 2000r)

Length	Connectors	Connectors	HP Model Number
	CPU side	Console Switch side
4 ft (1.2 m)	1 ea “D” high density video connector	1 ea 25-pin “D” connector	J1483A
	1 ea standard DIN type keyboard connector
	and 1 ea standard DIN type mouse connector
8 ft (2.4 m)	1 ea “D” high density video connector	1 ea 25-pin “D” connector	J1476B
	1 ea standard DIN type keyboard connector
	and 1 ea standard DIN type mouse connector
15 ft (4.6 m)	1 ea “D” high density video connector	1 ea 25-pin “D” connector	J1477B
	1 ea standard DIN type keyboard connector
	and 1 ea standard DIN type mouse connector

The cables above are also used to tier the console switches. The 25-pin end of the cable is connected to one of the ports in the console switch and the three connectors on the other end goes into the daisy- chained switch’s video, mouse and keyboard receptacles. So, when you’re planning your multiple server system, be sure to note that one port in the 4- or 8-Port Console Switch is used for daisy-chaining.

The HP 2-User Expansion Kit is easily connected to the Console Switch using a standard Category 5 Unshielded Twisted Pair cable with a RJ-45 style modular plug on the switch end and an EIA (TIA) 568 B plug, commonly used for 10BaseT Ethernet, on the expansion kit end. The second system console then connects to the Expansion Box and can actually be placed up to 500 ft away from the Console Switch.

HP Rackmount Flat Panel Monitor and Keyboard

When planning a multiple server system—as with any system that features a computer—one important decision you have to make is where to place the system console. It is typically a large device compared to the rest of the equipment and requires excessive amount of vertical space if placed in the

system rack.

To solve the planner’s dilemma, HP offers a space-saving solution: A high quality 15-inch flat panel display and a full keyboard with a trackball and wrist support that fits into only 2U of vertical space.

The display is a TFT active matrix and guarantees a flicker-free picture at refresh rates as low as 60 Hz.

Kit Contains	HP Model Number
15-inch High Quality Monitor	J1470A
Keyboard with trackball and wrist rest
Sliding drawer assembly with cable management arm
All mounting hardware

HP Rack System/E Vertical Extension Kit

How do you add a few more inches of rackmounting space? There really is a way with the HP Rack System/E Vertical Extension Kit, HP part number J1471A. Suddenly, you get more inches to use for sever- al additional servers, storage units, or networking equipment. Up to 8U, in fact.

The extension kit installs easily in minutes, without emptying the rack or using special tools. It comes complete with a rear door extension and two each 8U side panels.

HP Vertical Extension Kit	Includes
J1471A	Four column extensions, One rear hinge, One rear door extension, Two 8U side panels,
	All mounting hardware, Installation instructions

18