HP J3188A manual IPX Addressing for Novell NetWare, IP Addresses for IP and Non-IP Networks

Network Addressing

Network Addressing

IPX Addressing for Novell NetWare

IPX Addressing for Novell NetWare

The Novell NetWare network operating system uses a proprietary protocol called Internetwork Packet Exchange (IPX). The IPX protocol firmware is always available on an HP Hub-16M; it becomes active when the hub gets an IPX address. The IPX address consists of a network number and a device identification. The address is automatically assigned to the hub as follows (no IPX configuration of the hub is necessary):

■The network number is automatically assigned by a router or file server on the network that is running the IPX protocol.

■The device identification is the hub’s MAC address (also known as the Ethernet address or physical address). This address is a unique 12-digit hexadecimal number assigned to the hub at the factory.

IPX Addressing Notes:

Because the IPX address is assigned automatically, no IPX configuration is necessary; therefore no IPX configuration is provided on the hub console interface. By default, the hub is ready to be managed by an SNMP network management station that is configured for IPX communications.

IP Addresses for IP and Non-IP Networks

If you have chosen to manage your hub with an SNMP/IP network manager, your hub must be configured with an IP address. If your network will be connected with other networks that use IP addresses, you must use assigned IP addresses. Otherwise, you can build your own IP addressing scheme.

Globally Assigned IP Network Addresses

If you intend to connect your network to other networks that use globally administered IP addresses, Hewlett-Packard strongly recommends that you use IP addresses that have a network address assigned to you. There is a formal process for assigning unique IP addresses to networks worldwide. Contact one of the following companies:

D-2