HP J3188A Modem Configuration, US Robotics Courier V.FC/V.34, Megahertz XJ2288 Pcmcia card modem

C

Modem Configuration

Before installing the modems (one attached to the hub and one attached to the terminal/PC), configure them by either issuing the appropriate AT command or by setting the modem’s switches, as described in the tables in the rest of this appendix.

Hayes Smartmodem Optima 28.8 (V.34)

Hayes ACCURA 288 V.34 + FAX

Hayes V-Series ULTRA Smartmodem 14400

At the hub end: Issue the following AT command:

A0101: AT&FQ2&C2&D3S0=1&W0 (if &C2 gives error, use &C0)

Next Rev: AT&FQ2&C1&D3S0=1&W0

At the user end: Issue the following AT command:

AT&FW1&C1&W

US Robotics Courier V.FC/V.34

At the hub end: Issue the following AT command:

A0101: AT&F&C0S0=1&W0

Next Rev: AT&F&C1S0=1&W0

At the user end: Issue the following AT command:

AT&F&W

Megahertz XJ2288 PCMCIA card modem

At the user end: Issue the following AT command: AT&F\N0&W