HP AA-RSB6B-TE manual Udp, Ulptov, Wwn

Page 100

Glossary

U_Port

Universal Port; a switch port that can operate as a G_Port, E_Port, F_Port, or FL_Port. A port is defined as a U_Port when it is not connected or has not yet assumed a specific function in the fabric.

UDP

User Datagram Protocol; a protocol that runs on top of IP and provides port multiplexing for upper-level protocols.

ULP_TOV

Upper-level Time-out Value; the minimum time that a SCSI ULP process waits for SCSI status before initiating ULP recovery.

ULP

Upper-level Protocol; the protocol that runs on top of Fibre Channel. Typical upper-level protocols are SCSI, IP, HIPPI, and IPI.

Well-known Address

As pertaining to Fibre Channel, a logical address defined by the Fibre Channel standards as assigned to a specific function, and stored on the switch.

Workstation

A computer used to access and manage the fabric. May also be referred to as a management station or host.

WWN

Worldwide Name; an identifier that is unique worldwide. Each entity in a fabric has a separate WWN.

Xmitted Close State

The state in which an L_Port cannot send messages, but can retransmit messages within the loop. A port in the XMITTED CLOSE state cannot attempt to arbitrate.

Zone Configuration

A specified set of zones. Enabling a configuration enables all zones in that configuration.

Zone

A set of devices and hosts attached to the same fabric and configured as being in the same zone. Devices and hosts within the same zone have access permission to others in the zone, but are not visible to any outside the zone.

Zoning

A feature that runs on Fabric OS and allows partitioning of the fabric into logical groupings of devices. Devices in a zone can only access and be accessed by devices in the same zone.

100

hp StorageWorks SAN Switch 2/8 Installation Guide

Image 100
Contents Hp StorageWorks SAN switch 2/8 Page Contents Contents Regulatory Compliance Notices Electrostatic Discharge Technical SpecificationsTables Contents Contents About this Guide Intended Audience OverviewRelated Documentation Conventions Text SymbolsDocument Conventions Equipment Symbols About this Guide Rack Stability Rack stability protects personal and equipmentHP Technical Support Getting HelpHP Storage Website HP Authorized Reseller Overview1 Firmware SAN Switch 2/8 FeaturesHardware SFP Media Side Fan Side Accessory Part Number Optional Hardware KitsOverview Installing SAN Switch 2/8 Check the License Installed Four Switch Limitation ErrorsFour Switch Limitation CLI Error Messages Violation Timer Errors Four Switch Limitation Workarounds Unpack and Verify Carton Contents Number Description Selecting an Operating Location Installation and Safety GuidelinesCooling Requirements Power Requirements Installing the Switch as a Stand-alone Unit Installing the Fixed Rail Kit Attaching the Fixed Rack Mount Kit rails to the switch Connecting the power cord Optional HP System/e Rack Items Required for the HP System/e RackInstalling the SAN Switch 2/8 Installing the Switch in the Optional HP System/e Rack Installing the rear rail tray brackets Installing the tinnerman clips Installing the rubber washers Assembling the outer rails Assembling the inner rails Installing the switch into an HP Rack Securing the switch Power On Self-Test Setting Network Addresses via a Serial Connection Configuring SAN Switch 2/8 Network AddressingRequirements Connecting the Serial cable To configure port settings in a Unix environment, type Connecting the SAN Switch 2/8 to the LAN Connecting the Ethernet cableImportant Information on Setting the Core PID Format How to Check the Current Core PID SettingHow to Change the Core PID Format Modifying Domain IDs Specifying Custom Status Policies Connecting a Cable to an SFP Module Verifying Operation Inserting a cable into an SFPInstalling Multiple Switches into an Existing SAN Cascading Switches Managing SAN Switch 2/8 Interpreting LED Activity Front Panel LEDsLED Port Speed Ethernet Link Rear Panel LED Management Overview Displaying the Optional Feature Licenses Enabling Licensed FeaturesLogging into the SAN Switch 2/8 Running Basic Switch Operations Using TelnetChanging the Admin Password and User ID Configuring the IP and Fibre Channel Address Displaying Devices within the Fabric Setting the Switch Date and TimeChecking the Firmware Version Displaying Switch Configuration Settings SAN Switch 2/8 Diagnostic TestsInterpreting Post Results Diagnostic Tests Managing the SAN Switch 2/8 Saving Configuration Settings Upgrading Firmware Backing Up System Configuration Settings Restoring the System Configuration Settings FastBootUpgrading or Restoring the Switch Firmware Downloading Firmware from the HP WebsiteRegulatory Compliance Notices FCC EMC Statement USAEMC Statement Canada EMC Statement European UnionSpécification ATI Classe a France Germany Noise DeclarationRegulatory Compliance Notices Laser Safety Certification and Classification InformationBattery Replacement Notice Regulatory Compliance Notices Electrostatic Discharge Grounding Methods Technical Specifications Dimensions Power Supply SpecificationsMemory Specifications Environmental RequirementsSerial Port Specifications PINAlpa APIAsic ATMAwtov BERDLS CRCEdtov FC-AL-3 FC-FLAFcia FCPFlogi FsaccHBA ISLMIB LIPNAA Plogi Post RatovRrtov RscnRxid SANSwitch Translative ModeTarget TenancyUDP UlptovULP WWNIndex Network addressing Hp StorageWorks SAN Switch 2/8 Installation Guide 103 104