HP AA-RSB6B-TE manual Led

					Managing the SAN Switch 2/8
Table 4: Front Panel LED Patterns During Normal Operation
	LED	Color	Hardware	Recommended
LED	Location	Display	Status		Action
Switch Power	To right of	No light	Switch is off, or	Verify switch is
LED	Serial port		boot is not	on and has
			complete, or	completed
			boot failed.	booting.
		Steady green	Switch is on.	No action
				required.
		Slow-flashing	Error log	1.	Check port
		green	contains one or		status LEDs,
			more port		error log, port
			diagnostic error		media, and
			messages.		cables or
					loopback
					plugs.
				2.	Clear error
					log.
				3.	Rerun
					diagnostics to
					verify error
					condition is
					fixed.
Port Status LED	Above	No light	No signal or light	Check media
	each port,		carrier (media or	and cable.
	on left		cable) detected.
		Steady green	Port is online	No action
			(connected to	required.
			external device)
			but shows no
			traffic.
		Slow-flashing	Port is online but	Verify correct
		green	segmented,	device is
			indicating a	connected to
			loopback cable	port.
			or incompatible
			switch.

hp StorageWorks SAN Switch 2/8 Installation Guide 61