Installing the SAN Switch 2/8
2.Repeat steps 1a through 1d to attach right front bracket (Item 8) to the right side of the switch, see Figure 6.
2
5
1 | 4 |
3
6
7
8
1Left front bracket
2 Left rear bracket
3
5
6 Retainer nuts
7
Figure 6: Attaching the Fixed Rack Mount Kit rails to the switch
3.Position the switch in the rack as shown in Figure 6, providing temporary support under the switch (use clamps if necessary).
4.To secure the front brackets to the rack’s front rails, attach the right front bracket (Item 8) to the right front rack rail using two
5.Repeat step 4 to attach the left front brackets (Item 1) to the left front rack rail.
6.Tighten all screws and torque to
34 | hp StorageWorks SAN Switch 2/8 Installation Guide |