HP Virtual Connect Enterprise Manager Software manual Iso

Cause	46
Suggest action	46
Launching server migration from Systems Insight Manager throws an exception	46
Cause	46
Suggested action	46
Source preparation	46
Corrective action is required before this server can be migrated	46
Cause	47
Suggested action	47
Source server identification fails	47
Suggested action	47
Migration Agent deployment fails	47
Suggestion action	48
Server migration Source Agent deployment fails remotely from a Windows Server 2003
Application Station	48
Suggested action	48
Linux Source Agent window does not appear on RHEL 64-bit	48
Suggested action	48
Remote deployment of Linux Source Agent using non-root credentials fails	48
Suggested action	49
Manual installation of Linux Source Agent using sudo user privileges fails	49
Suggested action	49
Incorrect LUN size detected in step 2 of the migration wizard	49
Cause	49
Suggested action	49
Migrating a source server fails with the Microsoft Hyper-V role enabled	49
Suggested action	49
Destination preparation	49
Destination server identification fails	49
Suggested action	49
IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for
a P2V or a V2V migration	50
Suggested action	50
Kernel panic occurs when booting a virtual machine to the Insight Control server migration
Virtual Machine Boot CD ISO	50
Suggested action	50
Mouse does not work on a virtual machine booted with the Insight Control server migration
Virtual Machine Boot CD ISO	50
Cause	50
Suggested action	50
Primary array controller does not have logical drives defined	50
Suggested action	50
Primary controller configured in the system does not have drives attached	51
Suggested action	51
Primary controller in system is not supported by this version of Insight Control server
migration	51
Suggested action	51
The destination server displays a blank screen when booting to server migration Boot CD
ISO	51
Suggest action	51
Some storage volumes on the destination server are not available for selection	52
Suggested action	52
Static IP address cannot be assigned on the destination server while booting using the Boot
CD ISO	52
Cause	52

Contents 5