might also appear when a virtual machine is migrated from one Microsoft
You might be unable to assign the IP address to this device, which does not reappear on the Network Connections Page.
Suggested action
Manually uninstall the Network adapter in the Device Manager and trigger a Scan for Hardware Changes. This detects the NIC adapter and configures the drivers for it.
Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
The network adapter in the destination ESX virtual machine might not be initialized after a V2V migration.
Suggested action
1.Log in to the destination server using the keyboard.
2.Navigate to the Device Manager. To do so,
3.
4.Select Scan for hardware changes. A valid virtual network adapter appears in the Device Manager.
5.Reboot the virtual machine.
The destination virtual machine fail to boot after X2V migration
The destination virtual machine may fail to boot and display the error Attempting to load
a
Cause
For a
Suggested action
Enable the
While editing the settings of guest VMs created by server migration, an invalid OS ID warning appears
After performing an X2V migration to an ESX Host using the Automatic Boot feature of the server migration wizard and then changing the settings of the migrated VM, the following warning message may display:
The guest OS ID <guest name> is not valid.
Suggested Action
Follow the suggestion provided in the warning message to resolve the issue.
Once the issue is resolved, any disk can be added (which may involve upgrading the virtual machine's virtual hardware.)
Server is unresponsive during PSP installation
The server becomes unresponsive during PSP installation.
64 Troubleshooting