|
|
| Troubleshooting |
|
|
| Process Group Error Codes |
|
|
| |
| Error Code | WQERR_CONNECT | |
| Description | Problems connecting to the SCA process. If error logging to syslog is enabled, the errors | |
|
| are logged to the /var/adm/syslog/syslog.log log file. | |
| Action | Check the /var/adm/syslog/syslog.log log file for more information. If error | |
|
| logging is not enabled, enable it and try running your application again to generate error | |
|
| messages. | |
|
| Possible errors in syslog.log include: | |
|
| • cannot find entry | |
|
| Action: Add the entry | |
|
| • connect to SCA fails. The sca process is not running or is not responding. | |
|
| Action: Run the following commands: | |
|
| — | /opt/webqos/vin/sca_stop |
|
| — | /opt/webqos/vin/sca_start |
|
| • Other | |
|
| Action: Contact your HP Support Representative. | |
|
|
| |
| Error Code | WQERR_NOTROOT | |
| Description | The process attempted to set the process group to a value that can only be accessed by | |
|
| root. |
|
| Action | Set the process group to another value; or make sure the process setting the process group | |
|
| is a root process. | |
|
|
| |
| Error Code | WQERR_NOTREADY | |
| Description | PRM is not installed or not configured on the system. | |
| Action | Run the following command: | |
|
| prmconfig | |
|
|
|
|
30 | Chapter 3 |